HOME/PRODUCTS/UNIVERSAL SEAL MS

Neutral Oxime Silicon sealant private label producer

Silicon Sealant Foil Private label producer

Neutral Oxime Silicone 200 Sealant from your private label producer

This one-component sealant is based on oxime-crosslinking silicone with a neutral curing system, suitable for sealing joints, seams and gaps on most common porous and non-porous substrates. Produced in our own production facility in the Netherlands and available in your private label, it combines low modulus with high elastic capacity for demanding construction and glazing work.

Low modulus and high elastic capacity
High movement capability, ISO 11600-F&G 25LM
Excellent adhesion to many substrates, often without primer
UV and water resistant
Low odour and non-corrosive

A Private Label Neutral Oxime Silicone 200 Sealant Straight From The Producer?

Looking for a private label producer for a neutral oxime silicone sealant? We produce this high-movement sealant for the Building & Construction market in our own production facility in the Netherlands, and supply it fully in your private label. We offer flexible packaging in both cartridge and foil sausage, low minimum order quantities from 1 pallet, and consistent ISO 11600-F&G 25LM performance — the ideal private label partner for facade and glazing brands.

BaseNeutral oxime silicone
Specific gravityApprox. 1.02 g/ml
Skin formation time (23°C)20 min
Curing after 24 hours2 mm
Curing after 7 days6 mm
Slump resistance (ISO 7390)0 mm
Volume loss (ISO 10563)<5%
Elongation at break400%
Maximum deformation (ISO 11600)Approx. 25%
Elastic recovery (ISO 7389)>85%
Shore A hardness (ISO 868)15
Tensile strength1.5 MPa
Application temperature+5°C / +40°C
Temperature resistance-40°C / +150°C
MOQfrom 1 pallet

No documents available yet.

Silicone Oxime

Neutral Oxime Silicone 200

A one-component, oxime-crosslinking neutral silicone sealant, produced in our own production facility in the Netherlands and available in your private label.

Low modulus and high elastic capacity
High movement capability according to ISO 11600-F&G 25LM
Compliant with SNJF Façade & Vitrage
Excellent adhesion to many substrates, often without primer
UV and water resistant
Good ageing resistance
Low odour
Non-corrosive
Permanently elastic

Base Neutral oxime siliconeSpecific gravity Approx. 1.02 g/mlSkin formation time (23°C) 20 minCuring after 24 hours 2 mmCuring after 7 days 6 mmSlump resistance (ISO 7390) 0 mmVolume loss (ISO 10563) <5%Elongation at break 400%Maximum deformation (ISO 11600) Approx. 25%Elastic recovery (ISO 7389) >85%Shore A hardness (ISO 868) 15Tensile strength 1.5 MPaApplication temperature +5°C / +40°CTemperature resistance -40°C / +150°CMOQ from 1 pallet